Xiaomi 14 Pro shennong Stock ROM Firmware
Table of Contents
This post contains the Xiaomi 14 Pro shennong Stock Rom firmware Flash File that will allow you to restore your Xiaomi 14 Pro shennong smartphone to its original state. You will find these stock Rom files useful if you have used the flashed custom ROM /builds on your device, tweak your device to the taste you don’t want, bricked, and wish to return it to factory state.
Then this Xiaomi 14 Pro shennong Stock Firmware will fix your bricked phone; We will guide you on how to flash the right official Xiaomi 14 Pro shennong Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the Xiaomi 14 Pro shennong Flash File below. Download the right stock ROM file to fix your device.
Download Xiaomi Civi 3 Stock Rom Firmware Flash File
Xiaomi 14 Pro shennong Key Spec
- Android 14, HyperOS
- Dual SIM, Dual standby
- 6.73-inch FHD+ LTPO AMOLED, 3200 x 1440 pixel resolution
- 120Hz refresh rate, HDR10+, 3000nits peak brightness
- Xiaomi Longjing Glass
- Qualcomm Snapdragon 8 Gen 3 octa-core processor
- 12GB/16GB RAM
- Adreno 750 GPU
- 256GB/512GB/1TB UFS 4.0,
- 32-megapixel front camera
- 50-megapixel (f/1.4-f/4.0, dual-pixel PDAF, OIS) + 50-megapixel (3.2x zoom, PDAF, OIS) + 50-megapixel (ultra-wide/macro) rear cameras, dual-LED flash
The Advantage Of Stock Firmware:
- Can be to unbrick your phone
- Fix the Boot loop problem
- upgrade and Downgrade your phone
- Unroot and Fix Bugs on your phone
- To fix stutter
- You can solve software errors by flashing Stock ROM.
- To gain your device warranty Back.
Why you need Xiaomi 14 Pro shennong Firmware
It’s always advisable that you backup your device Firmware after purchasing it. You are going to need your device stock Rom for the following reasons someday.
- Downgrade or Upgrade your device: You can use the Xiaomi 14 Pro shennong Stock Rom Firmware to downgrade or upgrade your device to a new version. It depends on the release of the Stock firmware or your choice if the option is available.
- Unbrick: The Xiaomi 14 Pro shennong Stock Rom Firmware can also be used to unbrick any device. Smartphones can be bricked while trying to root it or flashing a custom ROM or recovery.
- Unroot: You can also use the Xiaomi 14 Pro shennong stock ROM firmware to unroot your device completely. After flashing the official stock firmware, you will gain your warranty back.
- Fix Issues: Your device might develop software-related issues; you can fix that by flashing the Xiaomi 14 Pro shennong Flash File.
Things You Need
- Charge your device: Before you proceed with the below information, you are recommended to ensure that your Xiaomi 14 Pro shennong is at least 50% charged.
- PC or Laptop: To carry out this Stock ROM Firmware installation, you need a PC or Laptop.
- Take Device Backup: The very first thing you need to do is make a backup.
- QD Loader HS USB Driver
- Install the Latest Driver: Xiaomi 14 Pro shennong USB Drivers
- Download: Download the above-required files on your PC.
How To Flash Xiaomi 14 Pro shennong Stock ROM Firmware
- Download MI Flash Tool and Extract in a Folder
- Install mi flash Tool on PC, [Window PC only,]
- Extract Stock ROM{which is Downloaded From below link
- Power Off your Xiaomi Device.
- Press and Hold Volume Down + Power key simultaneously for at least 8 seconds to enter into the Fastboot Mode.
- Once you have entered into the Fastboot mode,
- Connect the Xiaomi device to the Computer using the USB Cable.
- Open and the Mi Xiaomi Flash Tool and then Locate the downloaded Firmware you have extracted.
- Click on the Refresh button on the MI Flash Tool, allowing the tool to recognize the Xiaomi device.
- Now Click on the Flash Button to Begin the Flashing Process.
- Once the flashing process is completed, you will see the Success Message in the Mii Flash Tool.
- Your Phone should switch itself on Automatically IF not, then Disconnect USB and Power on manually.
- Done, Stock Rom IS Flashed/ installed, Enjoy…
How to Flash Xiaomi Xiaomi 14 Pro shennong Firmware using recovery
- Download Xiaomi Xiaomi 14 Pro shennong Stock ROM.
- Create a folder on your phone and name it downloaded_rom.
- If you downloaded the firmware on your PC, copy the firmware to the downloaded_rom folder you created on your phone.
- Launch the Updater App on your phone.
- There is a three-dot at the top right; click it and choose update package.
- It will take you to the File Manager of your phone.
- Choose the firmware, and installation will begin.
- Once done, your phone will reboot. Enjoy.
So This is a Complete Guide toInstall official ROMon Xiaomi 14 Pro shennong; if you have any questions, Let us Know Via a comment.
Warning
We will not be held responsible if any damage happens to your device.
Xiaomi 14 Pro shennong Stock Firmware Rom
